Stroomverlies tijdens een opname
Als er tijdens het vastleggen met de qCam een stroomstoring optreedt, moeten de volgende stappen worden uitgevoerd.
- Zorg ervoor dat de batterij voldoende lading heeft om te gebruiken (meer dan 20%)
- Zorg ervoor dat de batterijkabel niet beschadigd is
- Sluit de qCam opnieuw aan en schakel hem in
- U ziet een waarschuwing dat het apparaat niet correct wordt afgesloten. Accepteer deze waarschuwing om door te gaan.
- Sluit de qCam volledig af met de knop 'Afsluiten' op het startscherm
- Controleer of het apparaat succesvol wordt uitgeschakeld. Als dit niet lukt, moet u mogelijk handmatig de stroomkabel loskoppelen om het apparaat hard uit te schakelen en deze stappen nogmaals herhalen.
- Als de qCam succesvol wordt uitgeschakeld, schakelt u het apparaat opnieuw in en de waarschuwing zou moeten verdwijnen
De huidige opname is mogelijk beschadigd
Stroomuitval tijdens het vastleggen kan leiden tot bestandsverlies of -beschadiging. Het is dan nodig om het apparaat opnieuw in te schakelen en het vastleggen opnieuw te starten.
Problemen met het verbinden met de qCam vanaf de iPhone
Mocht u problemen ondervinden bij het openen van de Looq-app op de iPhone, dan kunt u de volgende stappen volgen.
- Start de iPhone handmatig opnieuw op (houd de aan/uit-knop ingedrukt totdat de uitschakelmelding verschijnt). Start de telefoon opnieuw op
- Ga op de iPhone naar Instellingen => Wifi en zorg ervoor dat de telefoon succesvol verbonden is. Zie het volgende artikel
Setting Up Your qCam
Powering on the qCam
1. Attach the 99Wh V-Mount Battery to the provided V Mount battery plate with belt clip by pressing down on the red tab and sliding the battery securely into place.
2. Connect the battery belt clip cable to the power input on the bottom of the qCam.
3. The qCam will power on automatically when connected to a power source, and you will know that it is working when the lights turn on.
4. The qCam fan will turn on automatically when connected to the battery to prevent from overheating.
5. The battery power level can be checked by pressing the power button on the side of the battery.
Note
The videos in this guide feature audio explanations of each procedure. Please ensure the volume on your device is turned on.
Mounting the iPhone
Every qCam comes included with an iPhone 8 SE which acts as the screen. The iPhone is used to see the live stream of images from the camera and to send commands, but no images or other data will ever be stored on the iPhone. The qCam has 2 TB of onboard storage.
1. Pick up the provided iPhone and ensure that it is in its Quad-lock case.
2. Hold your iPhone above the mount, aligning the Quad Lock mechanism on the back of the case with the mount.
3. Push the black tab on the mount with your thumb, then place the phone into the mount and twist it 45 degrees until it clicks into place.
4. Give the phone a gentle tug to ensure it’s securely locked in.
Note
The iPhone should be mounted in landscape mode during capture.
Connecting the iPhone to the qCam
The iPhone relies on the qCam's internal WiFi to complete the wireless connection. You can use the included USB-C to Lightning cable to charge the iPhone during capture, but this will not connect it to the qCam for use during capture.
1. Go to 'Settings' on the iPhone and click on 'WiFi'.
2. On the underside of the qCam, there is a serial number which is also the name of the WiFi. Find the serial number in the list of WiFi networks available. For example: "LOOQ Q 3G54S0PE".
3. Once selected, enter the password for the WiFi network. The password is: "12345678".
Note
Enlarge the video below to see the iPhone screen better
- Selecteer de Looq-app op het startscherm of navigeer naar looq.local in Safari
- Dit zou de qCam succesvol moeten verbinden